Sink Patch Kit | Easy DIY Repairs with Bath & Sink REPAIREZY™

In stock
Bath & Sink REPAIREZY™ is a sink patch kit designed to repair chips and scratches in tubs, sinks, and showers. Use on porcelain, acrylic, fibreglass, enamel, ceramic, and stone surfaces.
Regular price $9.99
Colour

Fix chips and scratches on your sink, bath, or shower without the cost or complexity of traditional repairs.

Bath & Sink REPAIREZY™ is a ready-to-use sink patch kit that makes DIY surface repair simple. Powered by advanced nanotechnology, this pre-coloured filler delivers long-lasting results in just minutes — no mixing, no mess, no trades required.

Perfect for tackling everyday damage in wet areas, it’s the fast, reliable way to restore a clean, polished look to your sink, tub, or vanity.

✅ Quick DIY Application – Just clean, apply, level, and wipe
✅ Nano-Powered Adhesion – Repairs flex with the surface and won’t pop out
✅ Ideal for Bathrooms & Laundries – Use on porcelain, fibreglass, enamel, acrylic, ceramic, and stone

Grab your sink patch kit today and restore your surfaces with confidence.

  • WORKS ON: Acrylic and porcelain bathtubs, enamel clawfoot baths, enamel or porcelain sinks, toilets, fiberglass shower stalls and base, or ceramic tiles.
  • GLOSS finish that can be adjusted to matte.
  • THICK consistency so it works well on vertical areas.
  • SURFACES: porcelain, fiberglass, enamel, acrylic, ceramic and stone.

AVAILABLE IN: White or use our Beige and White Repair Kit, to produce almond, tan, biscuit, or other shades of beige.

Colour Disclaimer

Actual colours may vary slightly from what you see on your screen due to factors like your device settings, lighting conditions, and individual colour perception. For recommendations, please contact us via email or telephone. Please note that any colour recommendations we provide are based on the information you share with us.

  • Water soluble, one-part epoxy.
  • UV and water resistant.
  • Can be sanded and drilled.
  • No primer required.
  • Suitable for use at temperatures above 70°F / 20°C.
  • In cool temperatures use a hairdryer to set for 2 minutes.
  • Vol. 12.9ml / 0.43 fl oz.
  • 60-day Customer Satisfaction Money Back Guarantee.
  • Not to be used on surfaces that are continually submerged.
  1. Using a needle or pin, remove dirt and grime from the affected area.
  2. For quality acrylic bath repair, ceramic sink repair or general bath repair, scrub soapy water into the affected area to remove any dirt or grime. Rinse and fully dry.
  3. Knead and shake the tube for 2 minutes.
  4. Slightly overfill the affected area with Bath &Sink REPAIREZY™.
  5. Gently level the repair with the end of the tube.
  6. Immediately remove smears and clean LEVEL with a damp tissue. Repeat.
  7. Set the repair, with hairdryer for 2 minutes.

Cure time:

  • Apply at 70F/20C for 2 hours (in cooler conditions allow more time) then recoat (if necessary).
  • Avoid any contact for 48 hours after application.
  • Avoid getting wet for 14 days [If necessary, cover area with a temporary shield. e.g., plastic bag sealed with electrical tape).
  • The repair will continue to strengthen and harden over the next 14 to 28 days.

FOR A MATTE APPEARANCE - tap repair with your finger immediately after step 6.

FOR DEEP DAMAGE - wait an hour and repeat steps #3, 4, & 5.
If required, repeat this process more.

FULL COLOUR CLARITY and TOUCH DRY in 2 hours. Full strength in 3 weeks.

How much damage can repair?
Depending on the size of the damage, MagicEzy Bath and Sink RepairEzy can repair 20 or more chips. MagicEzy Sink Patch Kit is super strong and durable, designed for small hairline cracks or chips less than 4mm.

How can I repair a vertical surface?
A hairdryer is recommended if you’re repairing a vertical surface and/or if the temperature is expected to drop below 20°C / 70°F within the first 24 hours. The hairdryer can hasten the curing time of the product.

How long does it take to dry?
In temperatures over 20°C / 70°F, our repairs are already extremely strong within 24 to 48 hours.

Does it dry as a gloss finish?
Yes, for a matte appearance tap repair with your finger after the hairdryer stage.

How do I store the tube once opened?
We suggest that you store the remaining product in the refrigerator.

What if I am not satisfied with the results?
All MagicEzy products come with a MONEY-BACK guarantee. Simply return it to us (with the receipt) within 60 days and we’ll provide a full refund or replacement.

Australian Made and Australian Owned

Where possible we source all materials in Australia. When the technology is not available we source the overseas option that delivers the highest quality to the market.

All MagicEzy products are manufactured and assembled in Australia from Australian and imported materials. All proprietary formulas are developed in Australia.

Contact us