Auto Scratch REPAIREZY™
Description
Easy way to repair scratched or chipped car paint fast
Auto Scratch REPAIREZY™ enables you to achieve a virtually invisible repair… regardless of the make or model or the location of the damage.
Suitability
- FIXES: Scratches, scuffs and chips.
- WORKS ON: Metal, fiberglass and plastic.
- ALL MAKES AND MODELS:
- USE IT EVERYWHERE: Car paint, wheel trims, bumpers, engine, side mirrors, bonnet/hood, grill, motorcycles, trailers, campers, and trucks. Works on metal, fiberglass and plastic … without a primer.
- FINISH: Dries with a gloss finish that can be adjusted to matte.
Colours
Available in 6 kits. Each kit contains two tubes.
- Black Metallic Kit
- Black Kit
- Grey Metallic Kit
- Silver Kit
- White Pearl Kit
- White Kit
Colour Disclaimer
Actual colours may vary. This is due to computer monitors displaying colours differently and everyone can see colours differently. We try extremely hard to ensure our images are as accurate as possible, but please understand the actual colour may vary slightly on your monitor. For recommendations, please contact us via email or telephone. Please note any advice given by our staff is based on the information provided at the time by the customer.
Tech Specs
- Water soluble, one-part epoxy.
- UV and water resistant.
- Can be sanded and drilled.
- No primer required.
- Above 70°F / 20°C.
- In cool temperatures use a hairdryer to set.
- Vol. 12.9ml / 0.43 fl oz.
- 60-day Customer Satisfaction Money Back Guarantee.
Application Instructions
Do NOT use when temperature drops below 70°F / 20°C as the product will not cure.
- Polish all scratches and chips 30 times using a car polish.
- Clean Surface: Wash damage and dry thoroughly.
- Knead / Shake: tube for 10 seconds.
- Customise Colour: Squeeze drops of our colours onto a clear plastic wrap and mix together. Apply to the largest chip or scratch and check the colour match.
- Apply enough Auto Scratch RepairEzy from nozzle OR use Plastic covered cap to place custom colours.
- Small Damage: For chips less than 1mm or 1/24-inch place a drop and rub in the damage using a kitchen paper towel. Continue rubbing with sufficient pressure to only remove surface smears.
- Larger Damage: Apply a drop into the damage.
- Level the repair gently using the “LEVEL” at the end of the tube.
- Smears: Remove gently with moist tissue.
Cure time:
- Let repair set for 1 hour @ 20c/70f.
- Warm repair for 1 minute with a hairdryer.
- Keep repair dry for 4 more hours.
Safety Data Sheet