Bath & Sink REPAIREZY™
Description
Patch chips and scratches on your bathtub, shower or sink … Without the mess, confusion or hassle.
When you have small areas of damage to fix, you don’t want to waste time trying to work with messy, multi-part epoxy fillers.
With Bath & Sink REPAIREZY™ we’ve made it easy for you to fix the damage - fast. Our product is a premixed, pre-colored, nanotechnology filler that enables you to achieve a permanent repair in minutes.
- SO EASY anyone can do it: Clean, squirt, level and wipe.
- NANO-POWERED so repairs won’t pop out.
- Lifetime Durability Guarantee.
Grab a tube today and you’ll be able to say goodbye to that ugly damage in no time.
Suitability
- WORKS ON: Acrylic and porcelain bathtubs, enamel clawfoot baths, enamel or porcelain sinks, toilets, fiberglass shower stalls and base, or ceramic tiles.
- GLOSS finish that can be adjusted to matte.
- THICK consistency so it works well on vertical areas.
- SURFACES: porcelain, fiberglass, enamel, acrylic, ceramic, stone & wood.
Colors
AVAILABLE IN: White or has a Beige & White Repair Kit, to produce almond, tan, biscuit, or other shades of beige.
Tech Specs
- Water soluble, one-part epoxy, air catalyst.
- UV and water resistant.
- Can be sanded and drilled.
- No primer required.
- Suitable for use at temperatures above 70°F / 20°C.
- In cool temperatures use a hairdryer to set for 2 minutes.
- Vol. 12.9mL / 0.43 fl oz.
- 90-day Customer Satisfaction Money Back Guarantee.
- Lifetime Durability Guarantee.
- Not to be used on surfaces that are continually submerged.
Application instructions
Do NOT use when temperature drops below 70°F / 20°C as the product will not cure.
- Scrub the area using soapy water and a toothbrush then rinse and fully dry.
- Shake the tube for 20 seconds.
- Apply enough to overfill the damage then wipe level using the levelling device built into the flat end of the tube.
- Immediately remove smears with a damp tissue.
- ‘Set’ the repair using a hairdryer for 20 seconds.
- Apply at 70F/20C for 2 hours (in cooler conditions allow more time) then recoat (if necessary).
- Avoid any contact for 48 hours after application.
- Avoid getting wet for 14 days [If necessary, cover area with a temporary shield. e.g., plastic bag sealed with electrical tape).
- MagicEzy will continue to strengthen and harden over the next 14 to 28 days BUT it is extremely strong in 48 hours.
FOR A MATTE APPEARANCE - tap repair with your finger immediately after step.
FOR DEEP DAMAGE- wait an hour and repeat steps #3, 4, & 5.
If required, repeat this process more.
FULL COLOR CLARITY and TOUCH DRY in 2 hours. Full strength in 3 weeks.
Safety Data Sheet