Fiberglass is built to last, but even the strongest boats pick up chips and small cracks. A bump at the ramp or everyday use is all it takes.
When this happens, most owners either book a repair or try to fix it themselves. Professional repairs look great, but they can be expensive and slow. DIY repairs can work well, but the usual fiberglass products are often harder to use than expected.
This guide breaks down the challenges and shows how MagicEzy 9 Second Chip Fix makes fiberglass repair simple for anyone.
Why Fiberglass Repair Can Be Difficult
Fiberglass repairs can feel complicated if you have never done it before. Most traditional methods involve multiple steps and take more time than people expect. A standard repair might include:
- sanding the area
- mixing resin
- applying layers
- levelling
- sanding again
- waiting for long cure times
These steps work well for professional shops, but they are not always practical for small superficial repairs at home. The process can be messy, time consuming and difficult to get right without experience.
This is why many boat owners look for something easier and more beginner friendly.
Common Mistakes in DIY Fiberglass Repair
Even when using a repair kit, there are several mistakes that can affect the outcome. The most common ones include:
- choosing a resin that is not strong enough for marine movement
- incorrect mixing ratios that weaken the repair
- applying product in unsuitable temperatures or humidity
- not cleaning or preparing the surface properly
- leaving dust, oil or residue on the repair area
- visible colour mismatch that makes the repair noticeable
- failing to allow proper cure time
These issues can make the repair look uneven or even cause the crack to return.
MagicEzy 9 Second Chip Fix: A Simple Solution for Fast Fiberglass Repair
MagicEzy 9 Second Chip Fix was created to simplify fiberglass repair. Instead of mixing resin or sanding layers, you apply it straight from the tube. It is ideal for cosmetic repairs on fiberglass boats, including small chips and surface cracks.
What makes it different?
- one part formula with no mixing
- ready to use for fast fiberglass repair
- advanced nano technology for strong bonding
- flexible finish that moves with the boat
- minimal shrinkage
- smooth surface finish
- available in multiple colours
MagicEzy 9 Second Chip Fix removes the steps that usually slow down fiberglass repair, making it easy for anyone to use!
5 Key Benefits for Boat Owners
Here is what makes MagicEzy 9 Second Chip Fix a practical option for small fiberglass repairs on your boat.
Fast and simple
You only apply the product once, level it and let it cure. No tools required.
Long lasting
The repair is made to hold strong against UV, water, vibration and regular use.
Clean finish
The formula is pre coloured and designed to blend with common gel coat shades.
Suitable for multiple surfaces
Works on fiberglass, acrylic, ceramic, stone and more.
Beginner friendly
Perfect for quick repairs without professional help.
How to Use MagicEzy 9 Second Chip Fix
Follow these steps for a smooth cosmetic repair.
- Using a needle or pin remove dirt and grime from the affected area.
- For quality fibreglass repair and general fibreglass repair, scrub soapy water into the affected area to remove any further dirt and grime Rinse and fully dry.
- Knead and shake tube/s for 2 minutes.
- Slightly overfill the affected area with 9 Second Chip Fix.
- Gently level the repair with the end of the tube.
-
Immediately remove smears and clean LEVEL with a damp tissue. Repeat if necessary.
For wet areas, seal after 1 hour with clear sticky/scotch/cello tape for 14 days.
Frequently Asked Questions About Fiberglass Repair
How much damage can it repair?
MagicEzy 9 Second Chip Fix is suitable as a filler for chips and gouges over 1mm in width up to 4mm deep. For smaller damage (fine cracks and scratches) use Hairline Fix instead.
One tube will repair 15-20 5mm (diameter) x 3mm (deep) chips.
What surfaces will it work on?
As well as fiberglass you can also use it to repair ceramic, porcelain, acrylic, wood, enamel, dry wall, and stone surfaces.
Do I need to prime the surface first?
9 Second Chip Fix will adhere to fiberglass without a primer. For plastic or aluminum surfaces or to strengthen weakened fiberglass, apply a coat of MagicEzy Mega Fusion primer first.
Will it repair hull damage?
The product will professionally repair areas that are above the waterline.
Can I add other tints or colorants to the product to achieve a color match?
No. Mixing additional products compromises the adhesion and effectiveness of MagicEzy products. We do not guarantee any products that have been mixed with other additives. However, two of our products can be mixed together.
Does the color dry lighter or darker than the color on the swatch?
The product is the same color wet or dry. When selecting colors note that the appearance of colors vary depending on the computer screen. If you’re not sure, buy one of our kits so you can blend colors to suit.
How long does it take to dry?
In temperatures over 20°C / 70°F, our repairs are already extremely strong within 24 to 48 hours.
Does it dry in gloss or matte finish?
9 Second Chip Fix dries in a matte finish.
Can I sand the product once dried?
Yes however there’s no need to sand the repair itself. Simply use the end of the tube to create a level repair. If you do want to sand the surface, please allow 7 days for the product to fully cure before sanding.
Can I paint over the product?
Yes, with water-based paints.
How do I store tube once opened?
We suggest that you store the remaining product in the refrigerator.
Repair Fiberglass Damage with MagicEzy
Fiberglass repair does not need to be complex or messy. MagicEzy 9 Second Chip Fix gives you a fast, simple and effective way to repair cosmetic damage on your boat without sanding, mixing or waiting days for results.
If you want a cleaner, easier approach to fiberglass repair, explore the MagicEzy range today and find the right colour to match your boat!