If you own a camper or RV, small fiberglass damage is almost unavoidable. A chip near a corner, a crack around a fitting, a drill hole left behind after removing something you no longer use... None of it feels serious enough to justify a big repair job, but it still catches your eye every time you walk past it.
That is where camper fibreglass repair makes sense as a DIY job. Not to rebuild panels or fix major damage, but to tidy up the everyday wear and tear that slowly makes a camper look older than it really is.
This guide is about fixing those small issues properly. No mixing tubs, no sanding or repainting panels required. Just a clean, simple way to repair, colour and seal fibreglass surfaces in one go!
Common types of fiberglass damage on campers
Most fiberglass damage on campers is not dramatic, it usually builds up slowly through normal use. You might notice:
- Small chips from knocks or road debris
- Cracks forming near screws or joins
- Old drill holes from removed accessories
- Shallow gouges from storage or parking mishaps
While these are only surface issues, the damage just looks unfinished and annoying. This is exactly the type of damage that the Magic Fiberglass Repair kit is designed for.
Why early fiberglass repairs matter
It is easy to ignore a small chip or crack. After all, it is not getting in the way of anything. But small damage tends to draw more attention over time, not less.
As time goes on:
- Dirt settles into the damage
- Edges become more visible
- Cracks can slowly spread
- The surface starts to look worn
Fixing it early keeps your camper's surface sealed and stops the damage from becoming a bigger issue. Using MagicEzy fiberglass repair makes sense when:
- The damage is localised
- The panel itself is still intact
- You are dealing with chips, cracks or holes
- You want the repair to blend in
The Ezy way to repair camper fiberglass
Traditional fiberglass repairs often involve mixing products, sanding, priming and repainting. They work, but they are messy and time-consuming, especially when you are only fixing a small area.
Fiberglass RepairEzy™ takes a simpler approach: it is a smart fiberglass repair kit that repairs, colours and seals fiberglass, PVC and acrylic surfaces fast. There is no mixing and no extra steps required. You can apply it straight from the tube and smooth it off.
As well, because it is pre coloured, the repair blends in rather than standing out.
Why Fiberglass RepairEzy™ suits campers and RVs
Fiberglass RepairEzy™ is also designed to keep things simple
- One part formula
- No tools required
- Repairs and seals at the same time
- UV and water resistant
- Can be applied to vertical surfaces
For camper owners, that means less fuss and a cleaner result that can be done in minutes!
What type of damage can you fix
Fiberglass RepairEzy™ is made for small to medium surface repairs. It works well for:
- Chips and gouges over 1 mm
- Small cracks
- Drill holes
- Localised surface damage
If you are dealing with very fine surface scratches or hairline cracks, MagicEzy Hairline Fix is a better match.
Where it works on a camper or RV
On campers and RVs, Fiberglass RepairEzy™ is commonly used on:
- Exterior fiberglass panels
- Gelcoat surfaces
- PVC and acrylic components
- Wall and panel edges
- Areas around fittings and fixtures
It dries to a gloss finish and can be sanded or drilled once fully cured if needed.
It comes pre-coloured in white, blue, or a blue and white kit, which helps repairs blend in without the need for painting.
How to repair camper fiberglass in minutes
You do not need special skills to use Fiberglass RepairEzy™. The process is very simple:
-
Clean the damaged area with soapy water. Rinse and dry it fully
-
Use a needle to remove any dirt from cracks or holes
-
Shake and knead the tube for two minutes
-
Apply a small amount directly into the damage
-
Smooth it gently using the end of the tube
-
Wipe away excess straight away with a damp tissue
For deeper damage, repeat the application every two hours for two or three layers.
If temperatures are below 20°C, a hairdryer can be used for two minutes to help the repair set.
How it compares to traditional fiberglass repair kits
Traditional repair kits can work well, but they are often more than you need for small camper repairs.
|
Feature |
Fiberglass RepairEzy™ |
Traditional Kits |
|
Ready to use |
Yes |
Often needs mixing |
|
Pre coloured |
Yes |
Usually needs paint |
|
Repairs and seals together |
Yes |
Often filler only |
|
Tools required |
No |
Usually required |
|
Easy cleanup |
Yes |
Often messy |
For small jobs, simpler is usually better.
Frequently asked questions from camper owners
How long does it take to dry?
In warmer conditions, repairs are very strong within 24 to 48 hours. In cooler weather, a hairdryer helps speed things up.
What finish does it dry to?
It dries to a gloss finish.
Can it be used on vertical surfaces?
Yes, it stays in place without sagging.
What if I am not happy with the result?
All MagicEzy products come with a MONEY BACK guarantee. Simply return it to us (with the receipt) within 60 days and we’ll provide a full refund or replacement.
How do I store tube once opened?
We suggest that you store the remaining product in the refrigerator.
A practical approach to camper fiberglass repair
Our Fiberglass RepairEzy™ gives you an fast, easy way to repair, colour and seal fiberglass surfaces in one clean DIY application.
If you want a simple solution that gets the job done without turning into a weekend project, get your kit and choose the colour that best suits your camper.