Bath & Sink REPAIREZY™ END OF YEAR SALE - MARKED PRICE DISCOUNTED ON CHECKOUT!
Description
Patch chips and scratches on your bathtub, shower or sink without the mess, confusion or hassle.
Bath & Sink REPAIREZY™ is a simple way to fix damage - fast. This premixed, pre-coloured, nanotechnology filler, enables you to achieve a permanent repair in minutes.
- SO EASY anyone can do it: Clean, apply, level and wipe.
- NANO-POWERED so repairs won’t pop out.
Grab a tube today and say goodbye to that ugly damage in no time.
Suitability
- WORKS ON: Acrylic and porcelain bathtubs, enamel clawfoot baths, enamel or porcelain sinks, toilets, fiberglass shower stalls and base, or ceramic tiles.
- GLOSS finish that can be adjusted to matte.
- THICK consistency so it works well on vertical areas.
- SURFACES: porcelain, fiberglass, enamel, acrylic, ceramic and stone.
Colours
AVAILABLE IN: White or use our Beige and White Repair Kit, to produce almond, tan, biscuit, or other shades of beige.
Colour Disclaimer
Actual colours may vary slightly from what you see on your screen due to factors like your device settings, lighting conditions, and individual colour perception. For recommendations, please contact us via email or telephone. Please note that any colour recommendations we provide are based on the information you share with us.
Tech Specs
- Water soluble, one-part epoxy.
- UV and water resistant.
- Can be sanded and drilled.
- No primer required.
- Suitable for use at temperatures above 70°F / 20°C.
- In cool temperatures use a hairdryer to set for 2 minutes.
- Vol. 12.9ml / 0.43 fl oz.
- 60-day Customer Satisfaction Money Back Guarantee.
- Not to be used on surfaces that are continually submerged.
Application instructions
- Using a needle or pin, remove dirt and grime from the affected area.
- For quality acrylic bath repair, ceramic sink repair or general bath repair, scrub soapy water into the affected area to remove any dirt or grime. Rinse and fully dry.
- Knead and shake the tube for 2 minutes.
- Slightly overfill the affected area with Bath &Sink REPAIREZY™.
- Gently level the repair with the end of the tube.
- Immediately remove smears and clean LEVEL with a damp tissue. Repeat.
- Set the repair, with hairdryer for 2 minutes.
Cure time:
- Apply at 70F/20C for 2 hours (in cooler conditions allow more time) then recoat (if necessary).
- Avoid any contact for 48 hours after application.
- Avoid getting wet for 14 days [If necessary, cover area with a temporary shield. e.g., plastic bag sealed with electrical tape).
- The repair will continue to strengthen and harden over the next 14 to 28 days.
FOR A MATTE APPEARANCE - tap repair with your finger immediately after step 6.
FOR DEEP DAMAGE - wait an hour and repeat steps #3, 4, & 5.
If required, repeat this process more.
FULL COLOUR CLARITY and TOUCH DRY in 2 hours. Full strength in 3 weeks.
Safety Data Sheet